Automatic Redialing - Sharp UX-A1000 Operation Manual

Sending a Fax by Automatic Dialing
Redial
You can automatically redial the last number dialed on the fax machine. This
procedure can be used to send a fax or make a phone call.
1
If you are sending a fax, load the
document(s).
•
If desired, press
the resolution and/or contrast.
2
Z
Press
REDIAL
last number dialed. Make sure the number that appears is the number
you wish to dial.
3
If you are sending a fax, press
If you are making a phone call, lift the handset. Dialing begins.

Automatic redialing

If you use automatic dialing (including Direct Keypad Dialing) to send a fax
and the line is busy, the fax machine will automatically redial the number. The
fax machine will make three redial attempts at intervals of five minutes. During
this time, RECALLING will appear in the display, followed by a two-digit
number assigned to the fax job. You will not be able to dial any other locations
while the message appears.
♦
You can press
♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialing may stop before three redialing attempts
are made.
70
to set
RESOLUTION/
RECEPTION MODE
once. <REDIAL> appears in the display, followed by the
to clear the message and stop automatic redialing.
STOP
START/
MEMORY
. Dialing begins.
READY TO SEND