Sharp UX-A1000 Operation Manual page 88

Making Copies
3
When you are ready to begin copying, press
If MEMORY IS FULL appears...
If you place a large number of originals in the feeder, the memory may
become full before all pages can be scanned (the display will show MEMORY
IS FULL). If this happens, press
scanned, and then repeat the copy procedure for the remaining pages,
including the page that was being scanned when the memory became full.
Copy Cut-off
When making a copy of a document that is longer than the printing paper, use
the copy cut-off setting to select whether the remaining part of the document
will be cut off or printed on a second page. The initial setting is YES (cut off
the remainder). To change the setting, follow the steps below.
1
Press FUNCTION
2
Press
3
Press
4
Press
1
(the remaining part of the document
will not be printed), or
cut-off to NO (the remaining part will be
printed on a second page).
5
Press
STOP
86
once and
once and twice.
once.
to set copy cut-off to YES
to set copy
2
to return to the date and time display.
COPY/HELP
START/
MEMORY
to copy the pages that have been
twice.
.
Display:
PRINT SET-UP
COPY CUT-OFF
1=YES, 2=NO
The display briefly shows
your selection, then:
INK SAVE MODE