Operating The Answering Machine - Sharp UX-A450 Operation Manual

Operating the Answering Machine

START/MEMORY
4
Press
The outgoing message can be up to 60 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Note: If an extension phone is connected to the UX-A450, an outgoing
message cannot be recorded, played, or deleted while the extension phone is
being used.
Operating the Answering Machine
Activating the answering machine
To turn on the answering machine so that callers can leave messages, press
RESOLUTION/
RECEPTION MODE until the arrow in the display points to A.M.
The outgoing message will play (you can stop playback by pressing
STOP
).
It will not be possible to set the reception mode to A.M. if an outgoing
message has not been recorded.
26
and speak into the handset to record a message.
PLAY
. Note that the general outgoing message
RESOLUTION/
RECEPTION MODE
STOP
.
TEL FAX
TEL/FAX
A.M.