Sharp UX-A1000 Operation Manual page 82

Using TEL Mode
Answering with the fax's handset
1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.
3
If the other party first speaks with you
and then wants to send a fax, press
START/
MEMORY
after speaking. (Press before
the sender presses their Start key.)
•
When RECEIVING appears in the
display, hang up.
Answering on an extension phone connected to the same
line
1
Answer the extension phone when it
rings.
2
If you hear a soft fax tone, wait until your fax responds (you will hear
pronounced, high-pitched tones), then hang up.
80
Note: If you have set the Fax Signal Receive
setting to NO, press
Beep
Pronounced, high-pitched
tones
Beep
RECEIVING
START/
MEMORY
to begin reception.
START/
RECEIVING
MEMORY