Operating The Answering System - Sharp Facsimile UX-CC500 Operation Manual

Operating the Answering System

4
Press
1
(To clear a previously set passcode,
press
2
5
Enter the number of the personal box
for which you wish to set a passcode.
Example:
(If you are clearing a passcode, enter
the number of the box and go to Step
7.)
6
Enter a 3-digit number for the passcode. The first digit of the number
must be 0, 5, 6, 7, 8, or 9.
START/MEMORY
7
Press
8
Return to Step 5 to set another passcode, or press
the date and time display.
Note: If you wish to change a passcode, clear the passcode and then enter a
new passcode. If you forget a passcode, clear it and enter a new passcode.
Operating the Answering System
Activating the answering system
To turn on the answering system so that callers can leave messages, press
RESOLUTION/
RECEPTION MODE until the arrow in the display points to TAD. (TAD stands for
"Telephone Answering Device".)
50
to set a passcode.
.)
for Box 1
1
.
RESOLUTION/
RECEPTION MODE
ENTER BOX # (1-4)
ENTER PASSCODE
ENTER BOX # (1-4)
STOP
to return to
TEL FAX
TAD