Extreme Networks ExtremeAnalytics PV-A-305 Installation Manuals page 27

10 Verify the USB flash drive is available as a boot option:
a Press F2 to open the BIOS Setup Menu when prompted, as shown in the figure below.
b Press the right arrow button to select the Boot Options tab.
c Select Internal EFI Shell as Boot Option #1 in the boot menu.
d Select [Enabled] in the USB Boot Priority field.
e Press F10 to save the changes.
A confirmation window displays.
f Select Yes and press [Enter].
The engine restarts.
11 Type F6 to open the Boot Menu when prompted, as shown in the figure below.
12 Select Install <version number> from the menu.
The installation begins automatically and once complete, the engine shuts off.
13 Remove the USB flash drive.
14 Turn on the engine.
15 Proceed to Configuration
ExtremeAnalytics® PV-A-305 Installation Guide for version 8.1
on page 14, and follow the instructions for configuring the engine.
Reinstalling Engine Software
27