Extreme Networks ExtremeAnalytics PV-A-305 Installation Manuals page 15

Table of Contents

Advertisement

=================================================================
Extreme Networks - Application Analytics Engine -
Welcome to the Application Analytics Engine Setup
=================================================================
Please enter the information as it is requested to continue with the configuration.
Typically a default value is displayed in brackets. Pressing the [enter] key without
entering a new value will use the bracketed value and proceed to the next item.
If a default value cannot be provided, the prompt will indicate that the item is either
(Required) or (Optional). The [enter] key may be pressed without entering data for
(Optional) items. A value must be entered for (Required) items.
At the end of the setup process, the existing settings will be displayed and
opportunity will be provided to correct any errors.
=================================================================
Press [enter] to begin setup or CTRL-C to exit:
2 Press [Enter] to begin the setup. The Root Password Configuration screen appears:
=================================================================
Root Password Configuration
=================================================================
There is currently no password set in the system administrator
account (root). It is recommended that you set one that is
active the first time the machine is rebooted.
=================================================================
Would you like to set a root password (y/n) [y]?
Note
You must set a new root password. This new root password will be used by the initial user
when logging in to the Application Analytics application.
3 Enter y to set the new root password.
4 Press [Enter] and enter the new password as prompted.
Enter new UNIX password:
Retype new UNIX password:
Password updated successfully.
The Application Analytics Engine Deployment screen appears.
5 Select the deployment mode that matches your network environment.
The default deployment mode is 3.
======================================================================
Application Analytics Engine Deployment Modes
======================================================================
This engine supports multiple deployment modes to suit different network environments
and connectivity characteristics. Please select a deployment mode below that best fits
your requirements.
0. Single Interface
A single interface is used for both management and monitoring traffic.
Suitable for feeds from XOS/VOSS/SLX switches.
ExtremeAnalytics® PV-A-305 Installation Guide for version 8.1
Configuration
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents