Extreme Networks ExtremeAnalytics PV-A-305 Installation Manuals page 20

=================================================================
The current system date and time is:
Please enter the values for date and time as directed where input is expected in the
following format:
MM - 2 digit month of year
DD - 2 digit day of month
YYYY - 4 digit year
hh - 2 digit hour of day using a 24 hour clock
mm - 2 digit minute of hour
ss - 2 digit seconds
=================================================================
Please enter the month [08]:
Please enter the day of the month [02]:
Please enter the year [2016]:
Please enter the hour of day [09]:
Please enter the minutes [34]:
Please enter the seconds [08]:
17 In the Use UTC screen, select whether you want the system clock to be set to use UTC.
=================================================================
Use UTC
=================================================================
The system clock can be set to use UTC. Specifying no for using UTC,
sets the hardware clock using localtime.
=================================================================
Do you want to use UTC (y/n) [n]?
18 In the Set Time Zone screen, select the appropriate time zone and press [Enter].
=================================================================
Set Time Zone
=================================================================
You will now be asked to enter the time zone information for this system. Available
time zones are stored in files in the /usr/share/zoneinfo directory. Please select from
one of the following example time zones:
1. US Eastern
2. US Central
3. US Mountain
4. US Pacific
5. Other - Shows a graphical list
=================================================================
Enter selection [1]:
19 The Modify Settings screen summarizes the settings you have entered and provides an opportunity
to modify the settings, if desired. Enter 0 to accept the settings.
================================================================
Modify Settings
=================================================================
All of the information needed to complete the installation of the Application Analytics
Engine has been entered. Enter 0 or any key other than a valid selection to continue.
If you need to make a change, enter the appropriate number from the choices listed
below.
=================================================================
0. Accept settings and continue
1. Set the root user password
2. Set user to run server as
3. Set hostname and network settings
4. Set SNMP settings
5. Set the system time
6. Modify all settings
ExtremeAnalytics® PV-A-305 Installation Guide for version 8.1
Thu Oct 28 09:34:08 2013
Configuration
20