Extreme Networks ExtremeAnalytics PV-A-305 Installation Manuals page 16

1. Single Interface With Tunnel
A single interface is used for both management and monitoring traffic.
A GRE Tunnel will be configured for traffic monitoring.
Suitable for feeds from Coreflow switches.
2. Interface Mirrored
Separate interfaces are configured for management and monitoring traffic.
The monitoring interface will put into tap mode for traffic monitoring.
Suitable for feeds from XOS/VOSS/SLX switches.
3. Interface Tunnel Mirrored
Separate interfaces are configured for management and monitoring traffic.
The monitoring interface will get its own IP Address and GRE Tunnels will be
configured for traffic monitoring.
Suitable for feeds from Coreflow switches.
4. Manual Mode
The interface and tunneling configurations will not be modified by this script,
leaving them to be manually edited by the user instead.
Please select a deployment mode [2]:
Note
If you select deployment mode 4, refer to the Extreme Application Analytics Deployment
Guide for information on how to configure your deployment manually.
6 If you selected deployment mode 0, 1, 2, or 3 the Application Analytics Engine Network
Configuration for eth0 screen appears. For each line, type the requested configuration information
and press [Enter].
If you will be using DNS, provide the IP address of the name server. If you are using a name server
enter a domain name for the engine. The NIS server is used to authenticate users logging into the
engine. If you are using an NIS server, make sure the NIS domain name is valid or users may not be
able to log in to the Management Center applications.
======================================================================
Application Analytics Engine Network Configuration for eth0
======================================================================
Enter information below to configure eth0
Enter the hostname for the engine (Required):
Enter the IP address for eth0 on 10.54.56.141 [10.54.56.141]:
Enter the IP netmask [255.255.255.0]:
Enter the gateway address [10.54.56.2]:
Enter the IP address of the name server (Optional):
Enter the domain name for 10.54.56.141 (Optional):
Enable NIS (y/n) [n]?
7 Continue to the appropriate section:
•
For deployment mode 0, proceed to step 9.
•
For deployment mode 1, proceed to step 7.
•
For deployment mode 2, proceed to step 8.
ExtremeAnalytics® PV-A-305 Installation Guide for version 8.1
Configuration
16