Speed Dialing - Sharp FO-DC500 Network Manual

Speed Dialing

If the number you want to dial has been programmed in a Speed Dial number,
you can dial it by pressing
1
Load the document(s).
SEND READY will appear in the
display.
RESOLUTION
•
Press
set the resolution and contrast if
needed.
•
To send the document ahead of other
documents waiting for transmission,
PRIORITY
press
•
To send the document directly from the
feeder (not through memory), press
DOCUMENT
. (Flip up the Rapid Key overlay
M/?
if it is down.)
SPEED DIAL
2
Press
numeric keys.
•
If you enter less than 3 digits for the Speed Dial number, press
complete the entry.
3
Check the display. If the destination shown is correct, press
STOP
not, press
SPEED DIAL
CONTRAST
and/or
.
and then enter the Speed Dial number by pressing the
and then repeat Step 2.)
Sending a Fax by Automatic Dialing
and then entering the Speed Dial number.
to
START/
to
ENTER
START/
. (If
ENTER
47