Sharp FO-DC500 Network Manual page 201

Setting 38: PRINT HOLD
Use this setting to turn on or turn off the Print Hold function (see page 177).
To turn on the Print Hold function, press
START/
press . (Note: A Print Hold code must be programmed before YES can
ENTER
be selected.)
To turn off the Print Hold function, press
START/
, enter the 4-digit Print Hold code, and press
ENTER
be selected if a received fax is being held in memory by the Print Hold
function. First print the fax and then turn off Print Hold.)
♦
Initial setting: NO
Optional Settings
or to select YES and then
or to select NO, press
START/
. (Note: NO cannot
ENTER
199