Sharp FO-DC500 Network Manual page 107

10
Enter a sender's fax number (max. 20 digits) by pressing the numeric
keys and then press
sender's numbers.
Example: If the sender's number is 201-555-1212, enter 2105551212.
Do not enter 12105551212 (do not enter "1" for a long distance number).
•
A combined total of up to 410 sender's numbers can be entered for all sets.
A sender's number that is already entered in another set cannot be entered.
•
If you need to delete a sender's number, press
number and then press
11
START/
Press .
ENTER
12
Enter the forwarding e-mail addresses using any of the following
methods:
•
Press a Rapid Key.
SPEED DIAL
•
Press
digits for the number, press
•
e-mail
Press
of 20 full e-mail addresses.)
Note: If you need to delete an e-mail address, press
the address and then press
Note: Scan to FTP and Scan to Desktop destinations cannot be selected.
13
START/
Press .
ENTER
START/
. Repeat until all you have entered all desired
ENTER
STOP
.
and enter a Speed Dial number. (If you enter less than 3
START/
ENTER
, enter an e-mail address, and then press
STOP
.
or
to complete the entry.)
FAX TRANSFER SET # 01
3:ENTRY MODE
1=ACTIVATE NOW
ENTER #(01-10,
2=ACTIVATE LATER
Inbound Routing
to select the
START/
. (Maximum
ENTER
or to select
, )
105