Canceling A Print Job - Sharp FO-DC500 Network Manual

Canceling a print job

Follow the steps below to cancel a print job.
♦
If there is a problem with a print job that is sent to the machine (for
example, the machine does not have the paper size specified for the job)
the ALARM light on the machine will come on. When this happens, you can
either cancel the job, or continue the job in spite of the problem.
Canceling a print job
1
JOB STATUS
Press
2
ON LINE
Press
STOP
3
Press .
4
Press to select YES.
1
Continuing a print job when the ALARM light is on
Note: If the ALARM light has come on because the machine does not have
the size of paper specified for the job and you continue the job anyway, the job
will be printed on a different size of paper.
1
JOB STATUS
Press
2
START/
Press .
ENTER
3
Press to select YES.
1
twice to display the NETWORK PRINT STATUS screen.
once to switch the machine off-line.
twice to display the NETWORK PRINT STATUS screen.
Printing from a Computer
129