Quick Reference Guide - Sharp FO-DC500 Network Manual

QUICK REFERENCE GUIDE

SENDING FAXES
Place the document (up to
50 letter-size pages) face
down in the document
feeder.
(Note: For Normal Dialing and Direct Keypad
Dialing, you can also load the document after
dialing the number.)
RESOLUTION
Press or
Normal Dialing
1. Lift extension phone or press
2. Dial the fax number (if using an extension
phone, dial on the extension phone keypad).
3. Wait for the reception tone (if a person
answers, ask them to press their Start key).
START/
4. Press .
ENTER
Rapid Key Dialing
Press the desired Rapid Key.
Speed Dialing
SPEED DIAL
1. Press and enter the desired Speed
Dial number (press
than 3 digits).
START/
2. Press .
ENTER
Direct Keypad Dialing
1. Dial the fax number.
START/
2. Press .
ENTER
224
CONTRAST
if needed.
SPEAKER
.
START/
if you entered less
ENTER
STORING AUTO DIAL FAX
NUMBERS
MENU
and then
1. Press
until ENTRY MODE is selected in the
display.
START/
. Make sure that
2. Press
ENTER
DESTINATION SETTING is selected.
START/
. Make sure that SET is
3. Press
ENTER
selected. (To clear a number, select
CLEAR .)
START/
.
4. Press
ENTER
5. To store a Rapid Key number, press the
desired Rapid Key.
To store a Speed Dial number, press
and enter a number from 1 to 100 (FO-
DC500) or 200 (FO-DC600) (press
if you entered l
ess than 3 digits
(If clearing a number, select it as explained
above and then press
6. If the network scanner option is installed,
SELECT DESTINATION TYPE will appear.
Make sure that FAX is selected and press
START/
.
ENTER
7. Enter the full fax number and press
8. Enter a name by pressing the letter keys and
START/
press .
ENTER
if this is a Chain Dial number
9. Select YES
or NO if not, and press
10.If the dual-line option is installed, select
LINE-1, LINE-2, or AUTO and press
STOP
repeatedly to exit.
11.Press
or
SPEED DIAL
START/
ENTER
).
STOP
START/
and .)
ENTER
START/
.
ENTER
START/
.
ENTER
START/
ENTER