Printing Received Faxes - Sharp FO-DC500 Network Manual

Print Hold
Turning on the Print Hold function
To turn on the Print Hold function, set Option Setting 38 to YES (see pages
189 and 199).
Note: A Print Hold code must be programmed before Option Setting 38 can
be set to YES.

Printing received faxes

When a fax has been received to memory because the Print Hold function is
turned on, RCVD PRINT HOLD FAX will appear in the display. Follow the
steps below to print the fax (or faxes).
1
MENU
Press
•
Make sure that PRINT HOLD is
selected in the display.
2
START/
Press
ENTER
•
Make sure that PRINT HOLD DATA
PRINT is selected in the display.
3
START/
Press
ENTER
4
Press the numeric keys to enter the Print Hold code.
5
START/
Press
ENTER
•
The received fax will print out.
178
and then
.
.
.
Display:
.
MENU MODE
6:SERIAL POLLING MODE
7:MEMORY POLL MODE
8:NETWORK SETTING
9: PRINT HOLD
PRINT HOLD
1:PRINT HOLD DATA PRINT
2:PRINT HOLD CODE SET
3:PRINT HOLD CODE CLEAR