AJA Ki Pro Ultra Control Manual page 10

2.26. 0x21 0x32 – Next/Prev Clip
This command, when supplied with the following payloads, will cause the device
to jump the next or previous clip in the currently selected playlist. The following
payload bytes are accepted:
• 0x01 – Next Clip
• 0xFF – Previous Clip
2.27. 0x24 0x31 – Cue Up with Data
This command functions identically to the behavior outlined in the SRW-5500 9
pin protocol document.
2.28. 0x40 0x10 – In Entry
This command functions identically to the behavior outlined in the SRW-5500 9
pin protocol document.
2.29. 0x40 0x11 – Out Entry
This command functions identically to the behavior outlined in the SRW-5500 9
pin protocol document.
2.30. 0x40 0x12 – A in Entry
Split audio editing is not supported by Ki Pro or Ki Pro Ultra Plus Ultra, however this
command will respond with ACK to maintain compatibility with typical controllers.
2.31. 0x40 0x13 – A Out Entry
Split audio editing is not supported by Ki Pro or Ki Pro Ultra Plus Ultra, however this
command will respond with ACK to maintain compatibility with typical controllers.
2.32. 0x40 0x14 – In Preset
This command functions identically to the behavior outlined in the SRW-5500 9
pin protocol document.
2.33. 0x40 0x15 – Out Preset
This command functions identically to the behavior outlined in the SRW-5500 9
pin protocol document.
Ki Pro Ultra and Ki Pro Ultra Plus Machine Control Guide 10 www.aja.com