AJA Ki Pro Ultra Control Manual page 8

2. 1 2. 0x2X 0x12 – Var Forward
This command initiates variable speed playback similar to a VTR. It takes the same
one or two byte payload as outlined in the SRW-5500 9 pin protocol document.
This command responds with ACK, but will do so before the transport state
has changed. Use the status bits to determine when the device has actually
changed state.
2. 1 3. 0x2X 0x13 – Shuttle Forward
This command shuttles the device similar to a VTR. It takes the same one or
two byte payload as outlined in the SRW-5500 9 pin protocol document. This
command responds with ACK, but will do so before the transport state has
changed. Use the status bits to determine when the device has actually
changed state.
2. 1 4. 0x20 0x20 – Rewind
This command puts the device in rewind playback. This is roughly 20x realtime
speed. This command responds with ACK, but will do so before the transport
state has changed. Use the status bits to determine when the device has actually
changed state.
2. 1 5. 0x2X 0x21 – Jog Reverse
This command jogs the device similar to a VTR. It takes the same one or two byte
payload as outlined in the SRW-5500 9 pin protocol document. This command
responds with ACK, but will do so before the transport state has changed. Use the
status bits to determine when the device has actually changed state.
2. 1 6. 0x2X 0x22 – Variable Reverse
This command initiates variable speed playback similar to a VTR. It takes the same
one or two byte payload as outlined in the SRW-5500 9 pin protocol document.
This command responds with ACK, but will do so before the transport state
has changed. Use the status bits to determine when the device has actually
changed state.
2. 1 7. 0x2X 0x23 – Shuttle Reverse
This command shuttles the device similar to a VTR. It takes the same one or
two byte payload as outlined in the SRW-5500 9 pin protocol document. This
command responds with ACK, but will do so before the transport state has
changed. Use the status bits to determine when the device has actually
changed state.
Ki Pro Ultra and Ki Pro Ultra Plus Machine Control Guide 8 www.aja.com