Full Integration With Your Emr System (Only S12C And S16) - PLUSOPTIX S12C Short Manual

3 Full integration with your EMR system (only S12C and S16)

As an alternative to manual entry of the patient data, the plusoptiX S12C and S16 can also
be connected for a full integration with your EMR system.
Data files
Interface EMR
Device
EMR
Figure 5: Automated connection to your Electronic Medical software
You simply have to choose a patient in your EMR system, and transfer the data to the
device. After the measurement, the measurement results and the screening report will be
retransferred and saved to your EMR system.
The screening report can be printed on any printer that is connected with your network or
workstation computer.
Figure 6: Automated transfer of patient data and measurement results
More information about csv file based EMR interface can be found on our homepage
(www.plusoptix.com), under support.
Seite 8 von 8