Serial Plate Location; Customer Service; Wiring Diagram - ALLIANCE T30 Series Troubleshooting Manual

Serial Plate Location

When calling or writing for information about your
product, be sure to mention model and serial numbers.
Model and serial numbers are found on the serial plate
on the rear of the machine and inside the upper loading
door hinge.

Customer Service

If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized parts
distributor.
For technical assistance, call (920) 748-3121.
70291301
MODEL NO:
TESTED FOR NATURAL &
SERIAL NO:
LIQUID PETROLEUM GASSES
V-/ HERTZ/ PHASE
AMPS, WIRES + GROUND
TOTAL kW, MOTOR kW
AMPLFIEDRER
REQ'D CIRCUIT BREAKER: AMPS
FAN OUTPUT:
@MAX "WC STATIC PRESSURE
EQUIPPED FOR: GAS@ "WC MANIFOLD PRESS.
MIN SUPPLY MAX SUPPLY
"WC. "WC.
PRESSURE: PRESSURE:
INPUT: BTU/hr @ BTU/cu.ft.
MADE IN U.S.A./FABRIQUE AU ETATS UNIS/FABRICADO EN LOS ESTADOS UNIDOS
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
ANS 72152
CLOTHES DRYER.
VOL II
CGA 72
70051001

Wiring Diagram

The wiring diagram is located inside the contactor or
junction box.
Models starting Serial No. 0309____ or later will have
the wiring diagram part number in the lower portion of
the electrical data on the serial plate.
Introduction
TMB1961P
9