Table of Contents
Advertisement
10 February 2005
1.6.2 INSTALLATION PROCEDURE
[A]
B481I102.WMF
!
CAUTION
Unplug the copier power cord before starting the following procedure.
1. Remove all tapes.
2. Open the right cover [A] of the copier.
3. Open cover [B] and remove it.
4. Remove the connector cover [C] (! x1).
5. Open the cover [D] of the interchange unit.
6. Install the interchange unit [E] (" x1).
NOTE: Take care not to pinch the harness at the front side.
7. Secure the interchange unit with the knob screws [F].
8. Reinstall the connector cover [G] which was removed in step 4 (! x 1).
[C]
[B]
[E]
[F]
1-25
[G]
[F]
[D]
B481I103.WMF
Advertisement
Table of Contents
