Ricoh TH-C1b Service Manual page 23

10 February 2005
[A]
14. If the optional bridge unit will not be installed: Swing the sensor feeler [A]
out.
15. Install the optional ARDF (EU model only) or the optional platen cover (see
ARDF Installation or Platen Cover Installation).
[C]
16. Install the stamp cartridge [B] if the ARDF [C] was installed.
17. Attach the cloth holder [D] to the left side of the scanner as shown. Then put
the cloth [E] in the cloth holder if the ARDF was installed.
[E]
[B]
B502I006.WMF
1-11
COPIER (B156/B220)
B156I517.WMF
B810I504.WMF
[D]