Without Using A Flash Memory Card - Ricoh TH-C1b Service Manual

SERVICE PROGRAM MODE
No. What It Initializes
10 Web Service/Network
Application
11 NCS
(Network Control Service)
12 R-FAX
14 Clear DCS Setting
15 Clear UCS Setting
16 MIRS Setting
17 CCS
5. Touch EXECUTE, and turn the main switch off and on.
6. Download the NVRAM data from an SD card (

Without Using a Flash Memory Card

If there is no SD card, follow the steps below.
1. Execute SP5-990 to print out all SMC data lists.
2. Open SP5-801.
3. Select the number for the item that you want to initialize.
4. Press EXECUTE and turn the main switch off and on.
5. Make sure that you do the following:
• Do the printer and scanner registration and magnification adjustments
( 3.12 "Copy Adjustments").
• Do the touch screen calibration (
• Referring to the SMC data lists, re-enter all values that have been changed
from their factory settings.
• Do the white level adjustment (
Adjustment")
6. Check the copy quality and the paper paths, and do any necessary
adjustments.
Deletes the network file application management
files and thumbnails, and initializes the job login ID.
Initializes the system defaults and interface settings
(IP addresses also), SmartNetMonitor for Admin,
WebStatusMonitor settings, and the TELNET
settings.
Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
Initializes the DCS (Delivery & Receive Control Server)
settings
Initializes the UCS (User Directory Control Server)
settings.
Initializes the MIRS (Machine Information Report
Service) settings.
Initializes the CCS ( Certification and Charge-control
Service ) settings.
5.4.2).
3.15 "Touch Screen Calibration").
Section 3.14 "Scanner White Level
5-116
10 February 2005
Comments