Ricoh TH-C1b Service Manual page 239

SERVICE PROGRAM MODE
Mode No.
5
(Class 1, 2, and 3)
508 4 Low Call Mode
11 Jam Detection: Time
Length
12 Jam Detection:
Continuous Count
13 Door Open: Time
Length
21 Jam Operation: Time
Length
508 22 Jam Operation:
Continuous Count
23 Door Operation: Time
Length
610 ACC Factory Setting
4 Recall
5 Overwrite
6 Previous Setting
Function / [ Setting ]
Selects the alarm mode.
[0 ∼ 1 / 1 / 1 /step]
• 0: Normal Mode (CC Auto Call)
• 1: Reduce Mode (CC Manual Call)
When selecting 1 (reduce mode), SP5-508-011 through
-023 specify parameters (referred to as "P" in the
following descriptions). Alarms occur under the following
conditions:
• Continuous jam:
When paper jams occur P times consecutively, where
P can be between 2 and 10. The default for P is 5 (
SP5-508-012).
• Continuous door open:
When a door is left open for P minutes, where P can
be between 3 and 30. The default for P is 10 (
508-013).
• Unremoved jam:
When a paper jam is left unremoved for P minutes,
where P can be between 3 and 30. The default for P
is 10 ( SP5-508-011).
Specifies the unremoved jam timer (
[3 ∼ 30 / 10 / 1 minute/step]
Specifies the number of consecutive jams (
004).
[2 ∼ 10 / 5 / 1 time/step]
Specifies the continuous door open timer (
004).
[3 ∼ 30 / 10 / 1 minute/step]
Selects how the machine handles the unremoved jam
alarm.
[0 ∼ 1 / 1 / 1 /step]
• 0: Auto call
• 1: Beeper
If an unremoved jam occurs, a phone call is
automatically made when 0 (auto call) is selected. To
enable SP5-508-21 through -23, SP5-508-4 must be set
to 1.
Selects how the machine handles the consecutive jam
alarm.
[0 ∼ 1 / 1 / 1 /step]
• 0: Auto call
• 1: Manual Call
Selects how the machine handles the continuous door
open alarm.
[0 ∼ 1 / 1 / 1 /step]
• 0: Auto call
• 1: Manual Call
Recalls the ACC factory settings.
Overwrites the ACC factory settings with the current
settings.
Recalls the previous ACC settings.
5-36
10 February, 2005
SP5-
SP5-508-004).
SP5-508-
SP5-508-