Table of Contents
Advertisement
10 February, 2005
Mode No.
5
(Class 1, 2, and 3)
912
Unit PM Alert
1
Unit PM Alert
913
Switchover Permission Time
2
Print Application Timer
102
Print Application Set
955
Test Pattern
1
Pattern
2
Density
967
Copy Server: Set Function
1
(0: ON 1: OFF)
970
Debug Serial Output
1
974
Cherry Server
1
Cherry Server
985
Device Setting
1
On Board NIC
2
On Board USB
Function / [ Setting ]
Display or does not display the unit PM alert for PCU
and development units when the PM counters for the
PCU and development units reach the PM cycle.
[0 ~ 1 / 1 / 1 /step]
0: Does not display the alert banner
1: Display the alert banner
Sets the amount of time to elapse while the machine is
in standby mode (and the operation panel keys have not
been used) before another application can gain control
of the display.
[3 ~ 30 / 3 / 1 minute/step]
[0 ~ 1 / 1 / 1 /step] DFU
Selects the test pattern. See section 5-1-3.
Selects the image density for a test pattern.
[0 ~ 255 / 255 / 1 /step]
Enables and disables the document server. This is a
security measure that prevents image data from being
left in the temporary area of the HDD. After changing
this setting, you must switch the main switch off and on
to enable the new setting.
DFU
Selects which version of the Scan Router application
program, "Light" or "Full (Professional)", is installed.
[0 ~ 1 / 0 / 1 /step]
• 0: Light version (supplied with this machine)
• 1: Full version (optional)
Enables/disables the On-Board Ethernet NIB.
[0 ~ 1 / 0 / 1 /step]
• 0: disable
• 1: enable
Enables/disables the "On Board USB".
[0 ~ 1 / 0 / 1 /step]
• 0: disable
• 1: enable
5-53
SERVICE PROGRAM MODE
Advertisement
Table of Contents
