Table of Contents
Advertisement
10 February 2005
B156I513.WMF
7. Reinstall the development units, and close the left cover.
NOTE: A white line or band may appear on one end of the paper if a
development unit is incorrectly installed. To correct this, pull out the
development unit partially (about 30 mm) and slowly reinstall it.
8. Remove the oil tank cover [A] (1 clip), and fill the oil tank to the maximum line.
NOTE: Do not fill the oil tank past the arrow [B].
[B]
1-9
COPIER (B156/B220)
[A]
Advertisement
Table of Contents
