Ricoh TH-C1b Service Manual page 234

10 February, 2005
Mode No.
5
(Class 1, 2, and 3)
118 Disable copying
1 Disable copying
120 Mode Clear Opt. Counter Removal
1 Mode Clear Opt.
Counter Removal
121 Counter Up Timing
1 Counter Up Timing
126 F Size Setting
1 F Size Setting
127 APS Mode
1 APS Mode
128 Code Mode With Key/Card Option
1 Code Mode With
Key/Card Option
Function / [ Setting ]
[0 ~ 1 / 0 / 1 /step]
0: Copying enabled
1: Copying disabled
Selects the mode clear for all accounting devices when
canceling the accounting devices counter.
[0 ~ 2 / 0 / 1 /step]
• 0: Yes (always cleared)
• 1: Standby (cleared before and after a job, not
cleared during an interrupt)
• 2: No (never cleared)
Selects the accounting timing.
[0 ~ 1 / 0 / 1 /step]
• 0: Feed (counted up when the feed sensor detects the
paper)
• 1: Exit (counted up when the exit sensor detects the
paper)
SP5-121 affects only the timing for sending signals to
the accounting device. The counters for other units or
devices are not affected.
Selects the size when the original size sensors of the
ADF or platen detect that the original size is "F size".
[0 ~ 2 / 0 / 1/step]
• 0: 8 ½ x 13
• 1: 8 ½ x 13 ¼
• 2: 8 x 13
Enables or disables the APS (Auto Paper Selection)
mode.
[0 ~ 1 / 0 / 1 /step]
•
0: Enables
•
1: Disables
[0 ~ 1 / 0 / 1 /step]
• 0: No combination (user codes cannot be used with
key/card options)
•
1: Combination (user codes can be used with
key/card options)
Also see SP 5-113.
5-31
SERVICE PROGRAM MODE