Reprinting Receipts - Ingenico MOVE 5000 Quick Manual

Common functions...
Sales
• Touch the screen or press ENTER if the
terminal
is in 'sleep mode' - ie off the powered base.
• Enter the amount then press ENTER
• For cash out (not available for 'Contactless' or
'Credit'):
• Enter the amount then ENTER or just
press ENTER to skip
• For tipping:
• Add tip amount then press ENTER or just
press ENTER to skip
• Confirm new transaction value, then press
ENTER
• For Contactless:
• Hold card over card reader at top of
terminal until four green lights show
• For Chip or magnetic stripe cards:
• Insert or swipe card and select account
• Follow prompts on screen
Refunds
• Press MENU button
• Select TRANSACTION
• Select REFUND
• Enter REFUND amount and press ENTER
• Enter REFUND password and press ENTER
• Present card and follow the prompts
Bendigo and Adelaide Bank Limited ABN 11 068 049 178 AFSL/Australian Credit Licence 237879. 1193392-1193387 (06/18)

Reprinting receipts

• Press MENU button
• Select PRINT
• Select TRANSACTIONS
• Select LAST (will print last transaction) or
INVOICE and enter the invoice number you
wish to re-print
Once transaction found, press ENTER and print
Pre-settlement
• Press MENU button
• Select BATCH
• Select BATCH TOTALS
• Press NO to return to the Home Screen or
press YES to print a list of all individual
transactions for the day
Manual settlement
• Press MENU button
• Select BATCH
• Select SETTLE
• Enter SETTLEMENT password and press ENTER
• Press NO to return to the Home Screen or
press YES to print a list of all individual
transactions for the day
Insert or replace receipt roll
• Open the paper compartment by lifting the
catch located at the top of the terminal and
pull the catch backwards to open.
• Insert the receipt roll in the compartment.
• Pull the paper to the top of the terminal.
• Hold the paper and close the lid.
• Press both corners of the paper flap
simultaneously until it clicks into position.
• To test the paper is loaded correctly press
the paper feed button on the bottom left
corner of the keypad.
To test printing
• Press the MENU button.
• Press 4 TERMINAL.
• Press 2 LOGON.
• If the paper does not feed or print correctly,
remove the paper roll, turn the paper roll
over to reload and try again.