Function Code 24 Alarm; Function Code 25 Keypad Beep; Function Code26: Door Beep; Function Code 27 Talk Time - PACH & COMPANY QUANTUM QC Series Manual

2. Enter 23 then #
3. Enter 1-9 (default=3) then press #

Function Code 24 Alarm

The system will make have warning alarm if invalid code or card has been enter according to the setting on
1. Log-in to programming
2. Enter 24 then #
3. Enter
0= disable, 1=disable system for 60 seconds and local beep (default setting), 2= disable system for 60 seconds with no beep
3= call directory (0-9) then press #

Function Code 25 Keypad Beep

Turn the keypad press beep On or Off
1. Log-in to programming
2. Enter 25 then #
3. Enter 0= off, 1= On (default) then press #
Function Code 26 Door Beep
Turn the door beep On or Off
1. Log-in to programming
2. Enter 26 then #
3. Enter 0= off, 1= On (default) then press #

Function Code 27 Talk Time

The amount of time the visitor can talk to the tenant. The timer starts as soon as the system is offhook.
1. Log-in to programming
function code 23.