Function Code 35 Temporary Card - PACH & COMPANY QUANTUM QC Series Manual

5. Enter 4-8 digit code, see digit setting on
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 (24 hours) - 20 see
10. Enter Sat ID 0-7 then press #
11. Enter
0= no more additional time zone then press # and return to
1= add additional time zone then press # and return to
* = exit programming

Function Code 35 Temporary Card

The fob or card will expire after a certain amount of used (1-10 times) in the programming, Up to 10 temporary fobs or cards can be programmed.
1. Log-in to programming
2. Enter 35 then #
3. Enter 0= delete 1= add then press #
4. Enter card 01-10 then press #
5. Present the card or fob in front of the black window, the system will register the card or fob 8-digit number printed then press #
function code 09
see Chapter 3 for keypad layout
function code 17 then press #
(enter 0 if no satellite connected to the
step 3
step 8
QR5)
to program another temporary code