PACH & COMPANY QUANTUM QC Series Manual page 12

Hide thumbs Also See for QUANTUM QC Series:
Table of Contents

Advertisement

1.
Log-in to programming
2.
Enter 04 then #
3.
Do the following:
- Press 1 (to clear all directories) then press #
- Press * to cancel
Function Code 05 - Call Forwarding
Option 1 must be selected. Default is 1 (enable)
1.
Log-in to programming
2. Enter 30 then #
3. Enter 0= disable (default) or 1= enable then press #
Function Code 06 - Add New Access Code
An access code is a keyless entry code to unlock the door. An access code can be programmed in 4, 5 ,6,7, or 8 digits, see
access code number of digit.
1.
Log-in to programming
2.
Enter 06 then #
3.
Enter the access code (4-8 digit, see
4.
Enter name up to 16 characters, then press #
5.
Enter door 1 or 2, or 3 for both, then press #
6.
Enter time zone 1-3 then press #
function code 09
), then press #
see
Chapter 3
for keypad layout
function code 09
to change the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents