PACH & COMPANY QUANTUM QC Series Manual page 13

7.
Enter 00 (24 hours) - 20 see
8.
Enter satellite system ID 0-7
9.
Enter
0= no more additional time zone then press # and return to
1= add additional time zone then press # and return to
* = exit programming
Function Code 07 - Delete Access Code
1. Log-in to programming
2.
Enter 07 then #
3.
Enter code to be deleted then press #
Repeat this step to delete another code
Function Code 08 - Clear All Access Cod
1. Log-in to programming
2.
Enter 07 then #
3.
Enter
1 to clear all access code then press #
* to cancel
function code 17 then press #
(enter 0 if no satellite connected to the
step 3
step 6
if access code exists
if access code does not exist
es
or
QR5) then press #
to program another access code