Table of Contents
Advertisement
G1646—12 pc. Precision R-8 Collet Set
Made from the highest grade steel available for
collet manufactures, these collets are precision
ground to very close tolerances. Complete 12
piece set. Includes:
⁄
" thru
1
8
plus
⁄
".
7
8
Figure 120. G1646 12 pc. Precision R-8 Collet
Set.
T10665—Adjustable Reamer Holder MT#3
This Pacific Tool and Gauge Adjustable Reamer
Holder secures a barrel chambering reamer in
the holder for free floating reamer movement. A
knurled wheel adjustment controls the amount of
tension, which also limits free-floating movement.
Figure 121. T10665 PTG Reamer Holder MT#3.
T10667—Bald Eagle Reamer Holder MT#3
This holder is designed to allow free movement
of a floating reamer in 3 directions: vertical, hori-
zontal, and angular, as required for proper perfor-
mance of any floating reamer.
Figure 122. T10667 Bald Eagle Reamer Holder
MT#3.
-74-
⁄
" in
⁄
" increments
3
1
4
16
T10118—Tailstock Digital Readout
Here's the slickest setup for managing the depth
of cut with your tailstock! Just set up, touch off and
zero out! You're going to know the exact position
of the tool. Both the scale display and remote
display come with a 0.0005" (five ten-thousandths
of an inch) resolution, inch or millimeter display,
zero keys and ON/OFF keys. The scale has an 8"
range and its display features ABS or INC mode
as well as a Hold key. Both displays read indepen-
dently of each other, too! You'll be able to see your
depth at a glance with the large,
remote display. The 6' data cable is long enough
to mount the remote display in almost any conve-
nient location. Tailstock adapter is not included,
but can be shop made to fit your lathe.
Figure 123. T10118 Tailstock Digital Readout.
T24798—Angle Plate Set, 2 pc.
Made of hardened, ground steel these angle
blocks provide accuracy within seconds, making
them a must have for any metal shop. One piece
is 3" x 3" x 4
⁄
" with two 45° and 90° angles. The
3
8
other piece is 4" x 3
⁄
" x 2" with 30°, 60°, and 90°
3
8
angles, making it perfect for setting your com-
pound rest to 60° for threading.
Figure 124. Model T24798 Angle Plate Set, 2
Model G0791 (Mfd. Since 9/15)
⁄
" character
1
2
pc.
Advertisement
Table of Contents
