Grizzly G0791 Owner's Manual page 46

Removing Center from Spindle
Mounting Center in Tailstock
Figure 50. Example of using a carbide-tipped
dead center installed in the tailstock.
-44-
Carbide-Tipped
Dead Center
Note: The maximum quill travel is 4", but
we do not recommend extending the quill
more than 2" or stability and accuracy will be
reduced.
Removing Center from Tailstock
Drift Key Slot
Figure 51. Typical drift key slot in the side of a
quill.
Model G0791 (Mfd. Since 9/15)