Tailstock
Quill Lock
Lever
⁄
" Square Drive
1
2
Lock-Down
Figure 38. Tailstock and quill lock levers in
locked position.
Model G0791 (Mfd. Since 9/15)
Tailstock Lock
Lever
Quill Handwheel
Quill Handwheel Graduated Dial
Increments ................................................. 0.001"
One Full Revolution ................................... 0.100"
Increments on Quill
Inch ...........................0"–4 " in 0.100" Increments
Positioning Tailstock
Optional: To precisely secure the tailstock, mount
a
⁄
" drive torque wrench in the square drive
1
2
shown in Figure 38, then tighten the tailstock to
40 lb/ft of torque. The center point will be drawn
down as much as 0.006". Do not exceed the max
torque or damage to ways and tailstock will occur.
Using Quill
-39-