Appendix B: Led Programming Guide - Nexcom NISE 106 User Manual

Appendix B: LED Programming Guide

a B: L P g
PPendIx ed rogrammIng uIde
LEDs are provided for custom system design. This appendix provides
definitions and its default setting for the LEDs in the NISE 106 series.
The LED definition is shown in the following table:
PowerOn
Pin Address
default
LED High A07h (Bit5)
Control the LED level from I/O port A07h bit5.
The bit is Set/Clear indicated output High/Low.
63
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. NISE 106 User Manual