Table of Contents
Advertisement
Removing the Bluetooth Assembly
NOTE: The Bluetooth
®
assembly is available on your system only if you
ordered it while purchasing your computer.
1.
Follow the instructions in "Before You Begin" on page
2.
Remove the left side-panel (see "Removing the Left Side-Panel" on page
3.
Open the PCI shroud (see "Opening the PCI Shroud" on page
4.
Remove the drive-bay shroud (see "Removing the Drive-Bay Shroud" on
page 19).
5.
Disconnect the Bluetooth cable from the connector on the master I/O board.
6.
Loosen the thumbscrew that secures the Bluetooth assembly to the
chassis.
7.
Slide and pull the Bluetooth assembly away from the front of the chassis.
6.
11).
18).
1
1 Bluetooth assembly
CHAPTER 20: BLUETOOTH ASSEMBLY
2
2
thumbscrew
0100
/
0100
Advertisement
Table of Contents
