2. Install the
top
cover.
3. Install the
left-side
cover.
4. Follow the procedure in
Side light
Removing the Side light
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
cover.
3. Remove the
top
cover.
4. Remove the
right-side
5. Remove the
front
bezel.
About this task
NOTE: Side light is available only on computers that are shipped with clear left-side covers.
The following images indicate the location of the Side light and provide a visual representation of the removal procedure.
Steps
1. Lay the computer on its right side.
2. Disconnect the Side-light cable from the system board.
3. Remove the two screws (M3x5) that secure the Side light to the chassis.
4. Lift the left side of the Side light bar slightly from the screw hole at the rear of the chassis.
5. Lift the right side of the Side light bar slowly from the screw hole at the front of the chassis.
6. Lift the entire Side light bar from the chassis.
24
After working inside your
Before working inside your
cover.
computer.
computer.