Leckey MyWay User Manual page 37

11.3 Harness preparation
and don
• See sections 9.1 'Preparing
the harness' and 9.2
'Donning the harness' for
full instructions.
11.6 Prone angle adjustment
• On initial use, set the user
in an upright position for
optimum line of vision.
If the user has difficulty
initiating stepping, tilt the
user forwards. Note the
loss of height as the prone
angle is adjusted. Use fine
height adjustment to raise
the child as required.
• See sections 8.10 'Prone
Angle Adjustment'
and 8.11 'Fine Height
Adjustment' for full
instructions.
11.4 Transfer to Frame
• See section 9.4
'Transferring the harness
to/out of the frame' and
9.5 'Attaching the harness
to the frame' for full
instructions.
11.7 Castors
• Set direction as free or
uni-direction, as
appropriate for the user's
steering ability. See section
8.7 'Direction lock feature'
for full instructions.
• Set resistance as free
or as required to ensure
optimum steering and
control of speed. See
section 8.9 'Resistance
feature' for full
instructions.
• Set rear lock if the user
tends to roll backwards.
See section 8.8
'Anti-roll back feature'
for full instructions.
p.37 MyWay User Manual
11.5 Shoulder height
and supports
• See section 8.14
'Shoulder Height
Adjustment' for
full instructions.