Leckey MyWay User Manual page 30

p.30 MyWay User Manual
10.3 Headrest
• To attach the headrest,
flip up the rubber cap
situated on the top of
the upper support unit
to expose the headrest
receiver slot.
• Insert the headrest
attachment pole into the
receiver slot, then turn
the handle in a clockwise
direction. Check the
headrest is secure.
• To detach the headrest,
turn the handle in an
anti-clockwise direction
to unsecure the headrest.
Remove the headrest
attachment pole from the
receiver slot. Close the
rubber cap situated on
the top of the upper
support unit.
• To adjust headrest height
the headrest must not be
attached to the product.
Unscrew both knobs and
remove them from the
back of the headrest.
Move the headrest
attachment pole to the
desired position- there
are 3 positions to choose
from- and reattach the
knobs in this position.
Attach the headrest as
per instructions above.
Note – when adjusting headrest height, take care not
to move/turn the handle on the headrest attachment
pole as this will make attaching the headrest to the
frame difficult.
Warning – Be aware of finger placement when
attaching/detaching the headrest to avoid potential
for finger nipping.