Leckey MyWay User Manual page 25

9.5 Attaching the Harness to the Frame
• Ensure the harness
connection point straps
have been adjusted as per
instructions in section 8.13
'Adjustment of the Harness
Connection Points'.
• Ensure the frame brakes
have been applied- see
section 8.6 'Applying/
releasing brakes' for
instructions
• Transfer the user to the
frame - see section 9.4
'Transferring the harness to
the frame' for instructions.
• Connect the white clips on
the harness connection
point straps to the white
buckles on the harness
(both sides) first.
• Connect the red clips on the
harness connection point
straps to the red buckles on
the harness (both sides).
• Once the four straps
and buckles have been
connected, the pulley straps
can be pulled to adjust the
user's position to the frame
i.e. bring them closer to the
frame if required. Ensure the
harness connection point
straps are taut- if the straps
feel a little slack, they need
to be brought in further by
pulling the pulley straps.
Warning – Ensure all four straps and buckles on the
upper support unit and harness have been connected.
Warning – If necessary, ensure the user is supported whilst
buckles are fastened either by attaching and using the
saddle, or via help of another person.
p.25 MyWay User Manual
Continued