Leckey MyWay User Manual page 13

8.8 Castors | Anti-Roll Back Feature
• Ensure the directional lock
feature has been applied to
both rear castors –
see section 8.7 'Direction lock
feature' for details.
• To apply anti-roll back, push the
knob towards the one directional
arrow icon as far as it will go.
Anti-roll back should be applied
to at least 2 castors- it will only
work on the castors it has been
applied to.
• To release anti-roll back, push the
knob towards the two directional
arrow icon as far as it will go.
NOTE- A clicking sound may
be heard when the frame is in
motion after the anti-roll back
feature has been applied-
this is normal and is not a
cause for concern.
8.9 Castors | Resistance Feature
• To apply resistance to the
castors push the knob towards
the '+' icon - the further the
knob moves towards the '+'
icon, the greater the resistance.
• To remove resistance to the
castors push the knob towards
the '-' icon - the further the
knob moves towards the '-'
icon, the lesser the resistance.
• Resistance can be applied
independently to each castor
to suit user requirements e.g.
resistance can be applied to
the left/right hand side castors
only for an asymmetric user;
or resistance can be applied
equally to all four castors.
Note – If you are concerned the user may move too
quickly in the product and there is potential risk of
collision/injury, apply the resistance feature.
p.13 MyWay User Manual