Leckey MyWay User Manual page 34

p.34 MyWay User Manual
10.6 Hoisting Straps
• To attach the hoist straps,
start with one side of
the harness e.g. the left
hand side.
Attach one carabiner
to the front loop on the
harness, then attach the
second carabiner to the
corresponding back loop.
Repeat the process on
the opposite side of the
harness with the second
hoist strap.
• To remove the hoist
straps, detach the
carabiner attached to
the front loop on the
harness, then detach the
second carabiner on the
corresponding back loop.
Repeat the process on
the opposite side of the
harness with the second
hoist strap.
Warning – Always ensure both hoist straps are used.
Never attempt to hoist using just one strap.
Warning – Each hoist strap must be attached front
and back on one side of the harness. The hoist straps
should never be attached to both hoisting points
situated at the front or back of the harness.
Left Side
Note – if you find attaching/detaching the saddle difficult,
offload the user from the saddle slightly to assist.
Right Side