Leckey MyWay User Manual page 14

p.14 MyWay User Manual
8.10 Upper Support Unit Adjustments | Prone Angle
• To increase prone angle,
turn the knob in an
anti-clockwise direction.
Up to 10˚ of angle
adjustment can be
achieved.
• To decrease prone
angle, turn the knob
in a clockwise direction.
Warning – once the prone angle adjustment knob reaches its limit in either
a clockwise or anti-clockwise direction, do not force the knob any further.
Note – if you find adjustment of the prone angle
challenging, ask the user if they can support some of
their weight if possible, or, ask another person to help
and support some of the user's body weight.
8.11 Upper Support Unit Adjustments | Fine Height Adjustment
Note- this section only
applies to sizes 2 and 3.
• Grasp both of the fine
adjustment handles and
ensure the balls of your
palms are placed onto
the flat of the handles.
• Push the adjustment
handles downwards until
you hear a click , then
pull the handles upwards
until you hear a click and
vice versa, continuing until
you achieve the desired
position. The fine height
can only be adjusted
upwards in increments
of 10mm.
• If you finish on a
downwards stroke, the
adjustment handles will be
facing outwards - ensure
the handles are pushed
upwards, out of the way.
Note – fine height
can only be used
to increase height,
it cannot be used
to reduce height.
Note – prone angle can be
adjusted with the user in
the product.
Note – if you find adjustment of
the prone angle challenging, ask
the user if they can support some
of their weight if possible, or, ask
another person to help and support
some of the user's body weight.