Programming (Changing) The Ice Portion; Agitation Time - Cornelius IDC 255 Service Manual

Programming (Changing) the Ice Portion

To change the size of any of the four ice dispense sizes follow the steps below.
1. To enter the program mode press the Program Button
time and hold for 5 seconds.
2. The Ice Portion Bar will come on
3. Press the RIGHT ARROW button
towards the right indicating the Ice Portion has been increased.
4. Press the LEFT ARROW button
the left indicating the Ice Portion has been decreased.
5. To exit the program mode press the Desired Size button
return to the dispense mode.
6. Place a cup under the ice chute and press the just programmed dispense size button
pense amount is not the desired amount repeat the process.
7. To exit, repeat Step 1.

Agitation Time

The software coding for the progate system involves a direct relationship between the dispense time and the agita-
tion time.
Dispense Time (mS)
Dispense Time (mS)
© 2006-2013, IMI Cornelius Inc.
to increase the amount of dispensed ice. The LED will move
to decrease the amount of dispensed ice. The LED will move towards
Agitation Ratio
50 10
70 10
90 10
110 10
130 10
150 10
170 10
190 10
210 10
230 10
Agitation Ratio
50 16
70 16
90 16
110 16
130 16
150 16
- 9 -
IDC 255 Progate Drive Thru Service Manual
and Desired Size button
or wait 10 seconds and the control will
Agitation Time (mS)
500
700
900
1100
1300
1500
1700
1900
2100
2300
Agitation Time (mS)
800
1120
1440
1760
2080
2400
Publication Number: 621057419SER
at the same
If amount dis-