Portion Control Panel Operations; Ice Portion Control Set Up And Adjustment Procedure - Cornelius ED 250 BCP Operator's Manual

Portion Control Panel Operations

Light Color
Green
Green -
flashing
Red then
Yellow

Ice Portion Control Set Up and Adjustment Procedure

Light Color
Step 1. Fill
Yellow
the Ice
Flashing
Chute
© 2002, IMI Cornelius Inc.
Enduro Ice/Beverage Dispenser Operator's Manual
Explanation
Press any CUP SIZE for por-
tioned ice.
Normal
Operation
Press INCREASE and then CUP
SIZE for extra ice.
Normal Oper-
Wait until chute has refilled and
ation Chute
press desired CUP SIZE again.
Refilling
To enter Clean Mode simulta-
neously press INCREASE and
DECREASE.
Press any CUP SIZE to empty
chute, then remove chute for
Clean Mode cleaning.
When chute is replaced, unit will
automatically return to normal
operation after one minute, or
INCREASE and DECREASE can
simultaneously pressed 3 times.
Explanation
To enter Agitation Adjustment Mode
simultaneously press INCREASE
and DECREASE three times then
press and hold INCREASE and
DECREASE for 3 seconds.
Press any CUP SIZE to select a
preset agitation time (small=short-
est time, X-Large=longest time, ect)
Chute Agi-
To exit Agitation Refill Time Adjust-
tation Refill
ment Mode simultaneously press
Time
INCREASE and DECREASE.
NOTE: Once in a mode the light will
blink to indicate the refill time: 1
blink for the shortest refill time-4
blinks for the longest refill. The fac-
tory recommendation is 2 blinks.
NOTE: Larger ice portions require
more time to refill.
- 3 -
Actions That Can Be Taken
— or —
Actions That Can Be Taken
Publication Number: 620916502OPR