Table of Contents
Advertisement
Trouble
NO ICE DISPENSED FROM
ICE PORTION CONTROLLER
NO ICE DISPENSED FROM
MANUAL ICE DISPENSE
PUSHBUTTON SWITCH
620919540
Probable Cause
A.
Insufficient ice supply in ice
bin.
B.
Ice in ice bin bridged (stuck
together).
C.
No electrical power to
dispenser.
D.
Insufficient or no CO
to dispenser.
E.
Ice chute cover not properly
installed.
F.
Defective ice chute interlock
switch.
G.
Defective interlock relay.
H.
Defective 24V transformer.
I.
Defective portion controller.
J.
Defective ice gate cylinder.
K.
Defective ice gate solenoid
valve.
L.
Agitation relay wiring incorrect.
M. Defective agitation relay.
N.
Defective agitator motor start
capacitor or start relay.
A.
Manual/Auto toggle switch in
"Auto" position.
B.
Insufficient or no CO
to dispenser.
C.
Defective 24VAC transformer.
D.
Defective manual override
solenoid valve.
E.
Defective manual ice dispense
pushbutton switch.
F.
Defective agitator motor or
start capacitor or start relay.
G.
Defective ice gate cylinder.
12
A.
Replenish ice supply as required.
B.
Gently tap on ice to break it loose.
C.
Plug in dispenser power cord, or
check fuse or circuit breaker.
supply
D.
Restore CO
2
E.
Make sure that cover is "snapped"
into place.
F.
Replace interlock switch.
G.
Replace relay.
H.
Replace transformer.
I.
Replace controller.
J.
Replace cylinder.
K.
Replace solenoid valve.
L.
Red wire should be connected to
"+" terminal (#3) of relay coil.
M. Replace relay.
N.
Replace defective component.
A.
Move toggle switch to "Manual"
position.
supply
B.
Restore CO
2
C.
Replace Transformer
D.
Replace valve.
E.
Replace switch.
F.
Replace defective component.
G.
Replace cylinder
Remedy
supply to dispenser.
2
supply to dispenser.
2
Hide quick links:
Advertisement
Table of Contents
