Declaration Of Conformity Ce-Marking - LinMot E1200 Installation Manual

LinMot Installation Guide

13 Declaration of Conformity CE-Marking

NTI AG / LinMot ®
Bodenaeckerstrasse 2
8957 Spreitenbach
Switzerland
Tel.: +41 (0)56 419 91 91
Fax: +41 (0)56 419 91 92
declares under sole responsibility the compliance of the products:
- Drives of the Series E12xx-xx-xx
with the EMC Directive 2014/30/EU.
Applied harmonized standards:
EN 61000-6-2: 2005 (Immunity for industrial environments)
–
EN 61000-6-4: 2007 (Emission for industrial environments)
–
According to the EMC directive, the listed devices are not independently operable products.
Compliance of the directive requires the correct installation of the product, the observance of specific
installation guides and product documentation. This was tested on specific system configurations.
The safety instructions of the manuals are to be considered.
These products are intended for installation in machines. Operation is prohibited until it has been
determined that the machines in which these products are to be installed, conforms to the above
mentioned EC directive.
The product must be mounted and used in strict accordance with the installation instructions
contained within the installation guide, a copy of which may be obtained from NTI AG.
Company: NTI AG
Spreitenbach, 11.04.2016
----------------------------------------------------
Dr. Ronald Rohner / CEO NTI AG
NTI AG / LinMot ® www.LinMot.com Page 21/22