Omron FH Series Connection Manual page 48

4
Select Display - Binary from the
View Menu.
5
Select Monitor from the Online
Menu.
6
The Monitor Memory Areas Dialog
Box is displayed. Confirm that the D
Check Box is selected and click the
Monitor Button.
7
Enter 10000 in the Start Address
Field in the D Window.
Confirm that the start address
changes to D10000.
8
Select bits 12 and 4 of D10002 and
bit 4 of D10003, and then click the
On Button. (After turning them ON,
the values change to 1.)
Then, turn ON bit 0 of D10000.
*D10002 and D10003 are an area
for a command code and contain
00101010(Hex) (Measurement
command). Bit 0 of D10000 is a
command execution (EXE) flag.
7．EtherNet/IP Connection Procedure
45