Error Messages - KERN EOC 6K-3 Operating Manual

Industrial scales
Hide thumbs Also See for EOC 6K-3:
Table of Contents

Advertisement

9.4 Error messages

Error message
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
EOC-BA-e-1711
Description
Excess load if weight exceeds capacity of +9d
Underweight (less than 20 d)
The weight is too low (less than -20 d)
Zero setting range exceeded on start-up of balance.
Zero setting range during start-up of weighing scale or on
pressing of
exceeded.
Is displayed on setting weighing scale to zero with
without load
For parts counting and percentage calculation:
Weighed value < zero
For add-up:
Total number of weighings above 999
For add-up:
Total weight above 999999
Adjustment failed
Keyboard locked
Keyboard unlocked
Capacity of batteries exhausted.
(Battery voltage below 5.7 V, automatic shutdown
happens at less than 5.4 V)
,
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents