Radiant Assembly - DCS BH1 series Installation And User Manual

Radiant Assembly

Installing the grease shields
The grease shields (two per burner) help deflect any grease
drippings away from the grill burner ports, preventing the ports from
getting clogged. They come packed with the other accessories, in a
separate bag.
Unpack the grease shields and position them on the pins above the
grill burners (two per burner), as shown in Fig. 18.
Radiant installation
1 Locate the radiant in the unit.
4 Place the 18 ceramic rods
onto the radiant.
If a ceramic rod breaks
1 Unlock radiant end cap by pushing it up with two fingers or using pliers.
2 Replace broken ceramic rod.
3 Lock radiant end cap.
22
INSTALLATION
2 Unpack ceramic rods and
remove radiant from the unit.
5 Lock radiant end cap.
Fig. 18 Grease shields
3 Unlock radiant end cap
by pushing it up with two
fingers.
6 Place the assembled
radiant into the unit.